The Alfa Laval SolidC Centrifugal Pump is designed for basic transport of fluids in hygienic applications. It provides reliable, low-maintenance operation. With its hygienic design, cost-effective operation and quick, easy maintenance, the SolidC offers excellent value for money.
The SolidC pump is available in four sizes to handle capacities up to 75 m3/hour and differential pressures up to 8 bar at 50Hz.
Materials
- Product wetted steel parts: W. 1.4404 (316L)
- Other steel parts: Stainless steel
- Inside surface finish: Standard blasted
- Product wetted elastomers: EPDM
- Ratary seal face: Carbon
- Stationary seal face: Silicon Carbide
Motor
- Foot-flanged motor according to the IEC metric standard, 2 poles = 3000/3600 rpm at 50/60 Hz, 4 poles = 1500/1800 rpm at 50/60 Hz, IP 55 (with drain hole with labyrinth plug), insulation class F.
Motor sizes
- 50Hz: 1.5 - 22 kW
- 60Hz: 1.5 - 22 kW
Min/max motor speed
- 2 poles: 900 - 4000 rpm
- 4 poles: 900 - 2200 rpm
OPERATING DATA
- Max inlet pressure
- SolidC 1 - 4: 400kPa (4 bar)
Temperature
- Temperature range: -10°C to +120°C (EPDM)
- Flush media: Max 70°C
Flushed shaft seal
- Water pressure inlet: Max. 1 bar
- Water consumption: 0.25 -0.5 l/min
- Connections for flushed shaft seal: SolidC 1 - 4: 1/8" G
Options
A. Impeller with reduced diameter.
B. Flushed shaft seal.
C. Rotating seal face of Silicon Carbide.
D. Product wetted elastomers NBR or FPM.
E. Product wetted surface finish mechanically polished to Ra ≤ 0.8 μm.
F. Surface finish measurement with certificate (Ra ≤ 0.8 μm).
G. Motor for other voltage and/or frequency.
H. Half speed motor.
Ordering
Please state the following when ordering:
• Pumpsize.
• Connections.
• Impeller diameter.
• Motor size.
• Voltage and frequency.
• Flow, pressure and temperature.
• Density and viscosity of the product.
• Options.
Glyanec